Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
engine swap help
#1
I've got myself a engine from a 1997 306 1.9d turbo t2 with everything engine looms, mounts, ecu comeplete engine with gearbox.

Will this fit straight into my 1.9d belingo 2004?
Reply
#2
(22-02-2015, 12:59 PM)joshed Wrote:  I've got myself a engine from a 1997 306 1.9d turbo t2 with everything engine looms, mounts, ecu comeplete engine with gearbox.

Will this fit straight into my 1.9d belingo 2004?

right where to start ok
first engine will fit in but you need to remove the flywheel fron both engines the 306 engine wont have pickup lugs
iremoved the pickup lugs bolted two flywheels together and drilled to match bit of grinding and fitted lugs to 306 flywheel if you dont do this your ecu will go into sleep mode but if you just swap the flywheel 306 cluch wont fit andthe cluch for that . flywheel is smaller therefor burnnig out quicker
use 306 exhaust maybe a bit of cutting and weldding. gearlinkage should be ok same goes for mounts.
use 306 cluch cable if using 306 gearbox

on my van i used an early 406 1905 td inlet manifold and piped it for front mounted intercooler as standard top mount will get abit hot good mod and looks wicked poking through bumper

need any help drop me a message no probs
good luck
Reply
#3
How is the swap performing? Bought myself a multispace 1.9d and interested in this swap too!

Sent from my SM-T210R using Tapatalk
Reply
#4
Ive done this swap on my 2004 van and its so much better than the 1.9 non turbo [Image: 840ea21401d14c27040942ea6999d20d.jpg]

Sent from my GT-I9300 using Tapatalk
Reply
#5
And the intercooler[Image: 6f078b29965becfe700a101700ea56bd.jpg]

Sent from my GT-I9300 using Tapatalk
Reply
#6
How much do you reckon the swap would cost? Engine+labour?

Sent from my SM-T210R using Tapatalk
Reply
#7
Labour depends on whos doing it and what off the required parts you have for an easy installation if you have the engine gearbox,gear selector clutch cable, shafts gearbox mount and braket battery tray,o/s mount removed from inner wing off 306/zx/xsara and lower engine steady! Spares or repairs car around £250 labour I would have thought about £400 to £500 depending on required work I.e servicing on replacement engine .

Sent from my GT-I9300 using Tapatalk
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Welcome
You have to register before you can post on our site.

Username:
  

Password:
  




[-]
Search
(Advanced Search)

[-]
Latest Threads
Service interval notice
Last Post: jocas74
Today 02:23 AM
» Replies: 7
» Views: 358
Winter Tyres
Last Post: geoff
Today 12:19 AM
» Replies: 0
» Views: 16
23 plate Citreon Berlingo classed as a van
Last Post: W Petsa
Yesterday 10:39 PM
» Replies: 2
» Views: 34
The creation of my personal solo-travellor.
Last Post: EM58
Yesterday 06:17 PM
» Replies: 12
» Views: 740
M59 Throttle pedal
Last Post: evdama
Yesterday 01:10 PM
» Replies: 5
» Views: 178
Berlingo 2007 1.6 hdi - intermittent sticky acce...
Last Post: Romahomepete
Yesterday 01:05 PM
» Replies: 7
» Views: 329
roof rack with slats
Last Post: BigVtwin996
Yesterday 11:53 AM
» Replies: 4
» Views: 192
Battery upgrade
Last Post: evdama
27-03-2024 03:58 PM
» Replies: 0
» Views: 99
Wanted: 2003 M59 steering rack
Last Post: evdama
27-03-2024 12:45 PM
» Replies: 1
» Views: 57
Airbag Fault Code
Last Post: Cumbrian
26-03-2024 03:06 PM
» Replies: 1
» Views: 214

[-]
Recent Visitors
Locations of visitors to this page

[-]
Hosting by

QuickHostUK