Hey Guys I have a mk1 berlingo with a bearing gone in the rear axle. I can get my hands on a pretty fresh Mk2 axle for cheap off a mate but do any of you know if they are a straight swap ??
Cheers Kenny
alut:
If you mean M59 rear beam assembly into an M49 bodyshell, no problems with the bolts - not 100% on the brake hoses/tubing being identical.
Gentleman thanks very much for the reply. Mines a 2001 pre facelift and the other axle is out of a 2006 facelift mk2. So I'm assuming mine is the M49 and the 06 Lingo a M59.
Cheers K
I can confirm that what addo said is correct fits perfect.
how easy was it to remove your old 1?
It wasn't to bad. You need a long T50 torx bit to remove the bushings. If you don't you can remove the two 13mm bolts that hold the bushings to the axle and leave the bushings in place. Just make sure you have a 4lb hammer and plenty of WD40.
alut: