Hi guys, my 08 berlingo drivers electric window was a little funny lately (going down when i push up on the switch), and eventually stopped. Replace the regulator inc motor and worked OK for a day or 2, now it went down today and will not come back up!. I hear the motor click like its trying to lift but it dosent!. Any ideas?
Thanks
Update,changed the switches and drivers window will still no go up
Sent from my iPhone using Tapatalk
Thanks guys!
Sent from my iPhone using Tapatalk
Does the glass slide freely?
Can you operate it with Lexia or another comprehensive scan tool that "test fires" body equipment?
Glass stays down,new regulator fitted but all infernos a clicking of the motor,would the switch be an issue?
Sent from my iPhone using Tapatalk
If you unclip the plastic lifter bits from the glass, can you slide it up and down easily by hand? Sometimes the run channel lining can get folded in on itself, this causes massive friction.
Also the command goes in a roundabout fashion. Switch to BSI, BSI to door unit. So you might have a problem with the BSI's output. Lexia will tell you if it "sees" the switch being pressed every time, or just sometimes.
Thanks mate
Sent from my iPhone using Tapatalk
I presume plugging the passengers switch into the drivers windows and till not workin rules out switch issue?
Sent from my iPhone using Tapatalk
Go my bsi reset yesterday and all was ok but this afternoon started the same thing again but luckily it came up.any permanent cure guys?????
Sent from my iPhone using Tapatalk
OMG this is really wrecking my head,new regulator,new switch and still window not going up,just clicking noise from the door card,very occasionally it will go up in stages but rarely. Any help would really be appreciated guys!
Sent from my iPhone using Tapatalk
Have you checked for water in the bsi?
Seems to me your bsi is playing up