Plylining/bulkhead/shelving
|
Posts: 18
Threads: 5
Thanks Received: 1 in 1 posts
Thanks Given: 0
Joined: Feb 2014
Location: irelamd
Reputation:
0
Holy Mary Mother of God!!!!!!!!!!!!!
Why was I never informed that plylining a berlingo is the most impossible task undertaken by man ever...... I swear it took me 2 days and I wish I had brought it to a pro. Never again. Ill stick with the Plumbing I wont be quitting the day job anytime soon!!!
Anyone else had any terrible experiences with it or is it just me??
•
Posts: 36
Threads: 10
Thanks Received: 5 in 4 posts
Thanks Given: 39
Joined: Apr 2014
Location: Cornwall
Reputation:
0
I thought about Ply lining my van but didn't in the end, I did make some ply shelving to go behind the seats and used ply to black out the rear windows. Didn't have any particular trouble doing it. I think if i was going to ply line the whole van I would probably buy a pre cut kit, they are only £135 on ebay. I know just buying the ply and doing it yourself would be cheaper in parts but it would save a lot of faffing around making templates and such.
Sorry it was a frustrating experience, shame you weren't a bit closer I would have given you a hand
•
Posts: 18
Threads: 5
Thanks Received: 1 in 1 posts
Thanks Given: 0
Joined: Feb 2014
Location: irelamd
Reputation:
0
Cheers, haha Dublin is a bit of a spin alright... Ill know for next time!
The following 1 user says Thank You to doolio89 for this post:1 user says Thank You to doolio89 for this post
• Saul
Posts: 8
Threads: 2
Thanks Received: 2 in 2 posts
Thanks Given: 3
Joined: May 2014
Location: Manchester
Reputation:
0
I've had an idea... (for my new L1 van eta June 2014)
Instead of ply lining throughout, use 3mm self adhesive foam in back to insulate and protect vehicle body, then utilise the side wall recesses with something like these elasticated mesh pockets[Image: $(KGrHqR,!iwE-l5nSn(-BP3bMrZ2+w~~60_1.JPG].
I'd then board out the floor, leaving access to anchor points & possibly raised a couple of inches to allow under floor storage / tool draws.
Any thoughts from anyone who does know what they're doing please... ?
•
Posts: 1,872
Threads: 67
Thanks Received: 455 in 361 posts
Thanks Given: 1,045
Joined: Dec 2012
Location: NEW South Wales - Far, far away!
Reputation:
1
Not sure if I know what I'm doing - by virtue of being a licenced and insured tradesman the telly pot-stirring shows would have you believe "definitely not"! The mesh pockets are a great idea - my car came with ply infills between the braces and I had been considering re-using these with rare earth magnets to retain - but the mesh is more practical in may cases.
I was considering using a reflective, self-bonding insulation foam for the roof, it's hard to keep the van warm on a really cold day. This would also dampen the sound of rain or wind a fair bit, and I think the foil skin might be tougher than your underlay proposal.
•
Posts: 8
Threads: 2
Thanks Received: 2 in 2 posts
Thanks Given: 3
Joined: May 2014
Location: Manchester
Reputation:
0
31-05-2014, 08:44 PM
(This post was last modified: 02-06-2014, 01:19 AM by Dip Stick.)
(30-05-2014, 11:53 PM)addo Wrote: .... I was considering using a reflective, self-bonding insulation foam for the roof, it's hard to keep the van warm on a really cold day. This would also dampen the sound of rain or wind a fair bit, and I think the foil skin might be tougher than your underlay proposal.
All the sheets or rolls of self adhesive foam i can find are 3mm, my first hurdle.
2nd how well will it grip,
3rd will the paint underneath react to the adhesive
4th does it peel off easily when i change my mind?
i did google ' reflective, self-bonding insulation foam ' but no joy. Let me know if you find owt please, and i'll keep you posted on the elasticated mesh pocket fit (est. delivery July)
EDIT: Found this 7mm stuff, not self adhesive, but... 3M General Trim Adhesive could do it...
I'll keep you posted.
The following 1 user says Thank You to Dip Stick for this post:1 user says Thank You to Dip Stick for this post
• Andre
Posts: 18
Threads: 5
Thanks Received: 1 in 1 posts
Thanks Given: 0
Joined: Feb 2014
Location: irelamd
Reputation:
0
Yeah that seems like a good idea, My problem is I have fittings and what not that have a bit of weight in them I needed more sturdy storage, But the raise floor for ladder/tools is an ingenius idea....
(30-05-2014, 11:10 PM)Dip Stick Wrote: I've had an idea... (for my new L1 van eta June 2014)
Instead of ply lining throughout, use 3mm self adhesive foam in back to insulate and protect vehicle body, then utilise the side wall recesses with something like these elasticated mesh pockets[Image: $(KGrHqR,!iwE-l5nSn(-BP3bMrZ2+w~~60_1.JPG].
I'd then board out the floor, leaving access to anchor points & possibly raised a couple of inches to allow under floor storage / tool draws.
Any thoughts from anyone who does know what they're doing please... ?
•
Posts: 1,322
Threads: 48
Thanks Received: 271 in 228 posts
Thanks Given: 4
Joined: Sep 2012
Location: Norway
Reputation:
20
Some of the acoustic foam plates available on the Bay of E can be used for insulation...
(I used 20mm thick foam in the doors of my previous Berlingo. Haven't had the time to install it in my current one, but have the foam ready)
Posts: 8
Threads: 2
Thanks Received: 2 in 2 posts
Thanks Given: 3
Joined: May 2014
Location: Manchester
Reputation:
0
(08-06-2014, 09:15 PM)Gadgetman Wrote: Some of the acoustic foam plates available on the Bay of E can be used for insulation...
(I used 20mm thick foam in the doors of my previous Berlingo. Haven't had the time to install it in my current one, but have the foam ready)
I found this self adhesive neoprene (wetsuit material) with thicknesses up to 12mm.
I'm figuring the van box is a cross between a radiator - hot outside, very hot inside, cold outside, etc and an acoustic enhancing Jamaican steel drum.
Intention is a full lining of between 6 and 12mm thick neoprene will minimise the radiator/steel drum problems best and keep the side & roof pockets/recesses open.
Fag packet calculation of about £240 materials to do roof & 2 sides in back. Only a craft knife needed to fit it yourself. (maybe)
I'll keep you posted.
•
Posts: 1,322
Threads: 48
Thanks Received: 271 in 228 posts
Thanks Given: 4
Joined: Sep 2012
Location: Norway
Reputation:
20
Good luck.
Haven't tried that material, so I can't say how suitable it is.
I've only done one ide in my Mk. I, yet...
(Driver's side, from B-pillar and all the way back, underneath the windows)
Used 20mm acoustic foam at the same time as I pulled cable to get a 12V and a 230V outlet in the back.
Of ourse, mine's a Multispace, not a van, so I had to remove one of the rear seats to even get to on of the panels...
Not certain what I'm going to do with the roof, though...
(Ragtop... )
•
|
Users browsing this thread: 1 Guest(s)
|
Welcome
|
You have to register before you can post on our site.
|
Latest Threads
|
HDI injectors failing
Last Post: Bizzy9
Today 03:55 PM
» Replies: 3
» Views: 149
|
Passenger seat warning light by pass
Last Post: brodfather11
Today 03:21 PM
» Replies: 4
» Views: 85
|
The creation of my personal solo-travellor.
Last Post: EM58
Today 02:43 PM
» Replies: 15
» Views: 1121
|
Hello
Last Post: geoff
Today 08:44 AM
» Replies: 1
» Views: 41
|
Clutch issue?
Last Post: Paul04
Today 07:07 AM
» Replies: 2
» Views: 85
|
2009 Berlingo cigarette lighter socket wiring
Last Post: brodfather11
Today 05:50 AM
» Replies: 1
» Views: 64
|
Adding heated seats to a k9
Last Post: ComboLifer
Yesterday 07:24 PM
» Replies: 2
» Views: 75
|
New 2024 Facelift Berlingo UK Disaster
Last Post: ComboLifer
Yesterday 07:22 PM
» Replies: 2
» Views: 78
|
Thick oil on bottom of filler cap
Last Post: ComboLifer
Yesterday 07:16 PM
» Replies: 2
» Views: 334
|
Rip off van servicing
Last Post: ComboLifer
Yesterday 07:14 PM
» Replies: 10
» Views: 836
|
Recent Visitors
|
|
Hosting by
|
|
|