Re to my berlingo mannaged to get my car up and running again after cleaning it up but my oil seems to be blocked and have put in engine flush but it appears to be stuck and is not getting throu to the sump plug any suggestions welcome thanks

There's nothing blocking the sump drain from the inside is there ?.    Try taking out the sump plug and poking a screwdriver through it., be careful you don't then get covered in it if it does come out.

When you filled it with engine flush did it overflow at the oil filler or run into the engine OK

You may have to take off the rocker cover to see if the oil drains under the cover are blocked or what. There is no restrictions for the oil to return to the sump otherwise the engine wont last long

I had a ford transit that someone had put the wrong oil in , may have been gear/rear axle oil, then that with a synthetic oil already in it turned it into a thick gloopy mixture that took ages to drain . The thing was it ran for ages like that then after the oil was cleaned out ran happily for years after.

It did not over flow it went in ok . Will try under the rocker cover for blokages thanks

Is it showing on the dip stick?
Griff

Yes there is oil showing in the dip stick none getting out to the sump plug?

What happens if you remove the sump plug?

It just releases a couple of drip's of oil have had engine flush in since i discovered the problem two days now and the drain oil management light went out yesterday but still nothing coming thru?

(25-02-2015, 05:30 PM)ryansm02 Wrote:  It just releases a couple of drip's of oil have had engine flush in since i discovered the problem two days now and the drain oil management light went out yesterday but still nothing coming thru?

the drain oil management light          Whats that ?


What engine model do you have ?

It is a 1.9d this light was on }|| looks like this but pointing downward }]]

Something is odd here, it sounds to me that you haven't found the sump drain plug but something else?