Hi all having a slight issue with the drivers side window not working I have eliminated the following

1. Checked Fuse
2. swapped over switches passenger side still works
3. Removed Regulator and plugged into passenger side it worked
4. Removed Passenger side Regulator plugged into drivers side no power
5. tested voltage to wiring loom it has power when switch is pressed


after looking around google it could be a BSI fault and requires a reset I have tried that and still no joy

any help would be much appreciated

(28-02-2016, 04:59 PM)dcm23251981 Wrote:  Hi all having a slight issue with the drivers side window not working I have eliminated the following

1. Checked Fuse
2. swapped over switches passenger side still works
3. Removed Regulator and plugged into passenger side it worked
4. Removed Passenger side Regulator plugged into drivers side no power
5. tested voltage to wiring loom it has power when switch is pressed


after looking around google it could be a BSI fault and requires a reset I have tried that and still no joy

any help would be much appreciated

Feed 12v from battery to the window motor. Maybe you have 12v on the wires but there is not enough amperes.

Best regards,
brajomobil

More likely a broken wire where loom goes though from "A" post to door. Constant movement due to door opening and closing fatigues the wiring.