unknown sockets - Printable Version +- Berlingo Forum (https://www.berlingoforum.com) +-- Forum: Specific Model Chat, Problems and Faults (https://www.berlingoforum.com/forum-8.html) +--- Forum: M59 Berlingo (https://www.berlingoforum.com/forum-28.html) +--- Thread: unknown sockets (/thread-11906.html) |
unknown sockets - Dawid Benazi - 29-06-2015 Hi im new in forum but not so new with Berii. i have one questions i found 3 unknown socket as i open my fuse panel is anyone to help me? im looking over web but nothing my Berlingo 1.9D 2003 Van i can provide numbers on wires . Please help i can't sleep is making me so annoying [attachment=2368] [attachment=2369] and second issue my van is running perfect . as is cold have juice with acce. but when he get to temp. 85-90 deg. is starting loosing that juice like something, stock on him and when cools down i go back to live again, going like crazy. please help and sorry for my ENG. in written. RE: unknown sockets - brodfather11 - 29-06-2015 Hi Dawid, Welcome to the forum. Reading between the lines I think your trying to say that your berlingo 1.9d runs ok when cold but not when hot. (85-90c) ?. Is it going into limp mode ? Fuel filters would be the first to check/change. Check that there are no wires off the temperature sensor nor off the air mass sensor. They measure the temperature of the air and coolant and tell the ECU how much fuel the engine needs. There is a sensor on the crankshaft which if loose or faulty can give problems The fuel injection pump timing may be out when hot . The timing is adjusted automatically by the ECU. A code reader would be a help and give a clue about your problem. OR are you having problems with your A/C ? Cant help with the relay sockets , they will be for equipment that you don't have fitted. RE: unknown sockets - Dawid Benazi - 30-06-2015 Hi Thx for reply, iv check van with mech. no fault code, iv check maf filter was dirty inside and as i touch with paper to clean. one pice of metal just brake off. i hope this was problem, this MAF is with temp sensor. already order new one i will fit it and give reply. egr clean it was full messy inside and lots of oil residue very dirty. iv order thermostat in-case and new temp sensor. air filter done fuel filter done EGR done temp sensor waiting for fitting thermostat waiting for fitting MAF waiting for fitting will check that and will give a full det. on this. i hope it will help someone a swell. and limp mode how i can check. no sign of stop light as im driving, no engine light on as driving. no black smoke from the back no smoke at all the blue socket is for dashboard clock. in better version. and my van don't have A/C RE: unknown sockets - Dawid Benazi - 03-07-2015 Problem solved. Low speed on fan not working the sensor fault, Maf and temp swich change . All good RE: unknown sockets - ron - 03-07-2015 (03-07-2015, 12:24 AM)Dawid Benazi Wrote: Problem solved. Low speed on fan not working the sensor fault,Good work.Let's hope your problems are over. |