+- Berlingo Forum (https://www.berlingoforum.com)
+-- Forum: Specific Model Chat, Problems and Faults (https://www.berlingoforum.com/forum-8.html)
+--- Forum: M59 Berlingo (https://www.berlingoforum.com/forum-28.html)
+--- Thread: [Engine] Converting to 1.9dt (/thread-12915.html)
Converting to 1.9dt - Karl1989 - 06-01-2016
Hib guys picking up a 1.9dt engine for my flat diesel Berlingo. I've heard lots of rumours of having to splice looms ect and thought i would make sure 100%. The van is a 03 plate 1.9d and putting in the 1.9dt. All I can think is there basically the same so plug and play and the down pipe will need changing. Anyone shed some light on if this is just a basic straight swap
RE: Converting to 1.9dt - Tomcat3 - 06-01-2016
Hi Karl I suggest you have a look at this thread and perhaps get in touch with Eddy http://www.berlingoforum.co.uk/thread-12741.html
He knocked it up over Christmas and did a cracking job.
RE: Converting to 1.9dt - Jed Clampit - 06-01-2016
Hi Karl worth a read he done a cracking job in a very short time he used the loom from the car that the engine come from if you PM him nice chap i'm sure he will help you out .
Converting to 1.9dt - Karl1989 - 18-01-2016
Cheers guys spoke on the fone I'm prepared slightly