+- Berlingo Forum (https://www.berlingoforum.com)
+-- Forum: Specific Model Chat, Problems and Faults (https://www.berlingoforum.com/forum-8.html)
+--- Forum: M59 Berlingo (https://www.berlingoforum.com/forum-28.html)
+--- Thread: EGR Valve (/thread-8899.html)
EGR Valve - Mark68 - 08-02-2014
Hi Guys,
I am considering blanking off the EGR valve on my MK2 2008 1.6hdi van
is this recommended and do I remove the EGR completely
Thanks in advance Mark
RE: EGR Valve - Opensauce - 08-02-2014
Simple way is to use a blanking plate from ebay here it just goes behind egr valve to blank it off. I would take some advice before you do anything though.
RE: EGR Valve - JohnM - 09-02-2014
The 1,6hdi was designed to have an EGR valve unlike the add-ons on earlier engines. To this end it has its own exhaust port and water cooling on the pipe leading to the inlet manifold. It is also linked to the ECU so the car knows if you mess with it.
If it is not broken I would leave well alone.
RE: EGR Valve - Jed Clampit - 09-02-2014
Just blank it off or have it mapped out as long has it's up to temp for the mot it will pass it will help the inlet stay clean :thumbsup: