01-05-2014, 04:26 PM
Hi All
Found this forum online and hopefully I can get some advice.
I have a 52 reg Berlingo 1.9D, 103k, Cambelted, runs superb.
BUT! One day, lost PAS and saw the Aux belt had snapped, I didnt think anything of it and replaced the belt. However, as soon as we started it, it would throw the belt off line and it would be one groove over the edge on the PAS Pump pulley. And if you drive it it eventually throws the belt off all together.
Is this a known/common problem, all the pulleys/tensioners "look" to be fine but obviously eye sight cannot always be trusted
Thanks
Found this forum online and hopefully I can get some advice.
I have a 52 reg Berlingo 1.9D, 103k, Cambelted, runs superb.
BUT! One day, lost PAS and saw the Aux belt had snapped, I didnt think anything of it and replaced the belt. However, as soon as we started it, it would throw the belt off line and it would be one groove over the edge on the PAS Pump pulley. And if you drive it it eventually throws the belt off all together.
Is this a known/common problem, all the pulleys/tensioners "look" to be fine but obviously eye sight cannot always be trusted
Thanks