06-02-2015, 08:51 PM
'Kay guys I need a wiring harness diagram which shows all of the connector plugs for the external temperature sensor.
I've changed the sensor (thermistor) and the displayed temperature is all over the place as it was before the change. Occasionally it will display
the correct outside air temperature and suddenly the temperature will begin to drop. OR the display will show minus 39 degrees
and very slowly climb to a realistic value. This sounds to me like one of the loom connectors is contaminated by corrosion.
Normally I would PM Rustscrat for this but he seems to have disappeared along with Addo so if anyone can help I would be eternally
grateful.
I've changed the sensor (thermistor) and the displayed temperature is all over the place as it was before the change. Occasionally it will display
the correct outside air temperature and suddenly the temperature will begin to drop. OR the display will show minus 39 degrees
and very slowly climb to a realistic value. This sounds to me like one of the loom connectors is contaminated by corrosion.
Normally I would PM Rustscrat for this but he seems to have disappeared along with Addo so if anyone can help I would be eternally
grateful.
The Older I get the Better I Was!