Retro Fit Cruise Control

[dumdum]

well after popping in on a few friends garages, I popped along to Peugeot (hate Ipswich Citroen) dealership, and have been quoted £230 to supply and fit Cruise Control if they don't need transponder code, what is the typical code length as it's an extra £20 if I don't know mine and it's needed

no the transponder codes not needed at all!! 1000000 percent!

you just plug the stalk in and change two parameters and that's it, I can do it for 120 quid fitted if you have a drive up to near Mansfield

[ATL_driver]

thank you that's all I needed to know, Peugeot are happy to do it, boss wants dealership come back so £230 it is

[klberlingo]

Does anyone know will the snap on diagnostic reader ethos 2013 be able to read the ecu and set the codes required. Have access to one and was wondering before i'd go and buy a stalk

[dumdum]

have a look in configuration before buying the stalk, it may or may not do, try changing it before you have the stalk it wont hurt owt and you can then change it back by the same method.... off the top oif my head I don't think it does tho

[ATL_driver]

my friends didn't/couldn't do it so I'm biting the bullet and going main stealer

[ATL_driver]

[Image: 32869924-8882-4F6C-8C3B-4858AD8349FE_zpsflzzzvx4.jpg]

fitted the stalk, there is a little blank that you pull out, using a craft knife I trimmed the cowling plastics, and it just plugs in, now waiting for my garage to get is Lexia guy in to raped my for £££'s and turn it on...
[Image: 6D5B63B4-DA8E-4A84-8A46-8BA7168EBEEA_zpsevhjdk30.jpg]

[ATL_driver]

[Image: 09874B7D-B15A-4B3A-AB3A-735E960CF4CF.png...07997.jpeg]


all done happy Charlie.