10-09-2014, 08:02 PM
My Berlingo has recently developed a weird judder.
It comes and goes with no real pattern to it(Not going to drive around all that much until I know what is causing it...)
There's plenty of fluid in the reservoir. The suspension and stering feels tight when I jack it up and start pulling on parts.
There's a pressure sensor(I believe) on the high-pressure line from the servo pump which isn't connected to anything, so if the pressure is too low, I wouldn't get a warning.
(Artifact from my engine change earlier. There was no matching connector on the wiring loom it came with)
Assume that the pump and rack are original and have suffered nearly 130K miles on 'assorted quality' roads...
It comes and goes with no real pattern to it(Not going to drive around all that much until I know what is causing it...)
There's plenty of fluid in the reservoir. The suspension and stering feels tight when I jack it up and start pulling on parts.
There's a pressure sensor(I believe) on the high-pressure line from the servo pump which isn't connected to anything, so if the pressure is too low, I wouldn't get a warning.
(Artifact from my engine change earlier. There was no matching connector on the wiring loom it came with)
Assume that the pump and rack are original and have suffered nearly 130K miles on 'assorted quality' roads...