Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[Transmission] berlingo 2005 hdi clutch problem ???
#1
hi all new to forum first post as well my 2005 2.0 8v hdi berlingo of late has devoloped a couple of faults noticed last month the clutch juddering in reverse gear and then the last couple of weeks it has started to judder in 1st gear as well just at the bite point but today the clutch peddle came tight to the top and became slightley stiffer but all gears still engange and the car drives normal the bite point now is more towards the top of the pedle the car has coverd 120000 miles and has never let me down in the 10 years of ownership and has 3 services a year by myself and wants for nothing no expense spared any ideas about the clutch faults would be greatley apreciated many thanks ian
2005 multispace desire 2.0 hdi iron grey
Reply
#2
Is it a cable clutch? If so check/ replace. Check engine mtgs.Last of all,it may be a distorted/contaminated clutch centre plate.Do you get any slip?
Strawberry flavoured windows  Dodgy
Reply
#3
hi ron thanks for replying yes it cable operated i belive the auto aduster may have broke down explianing now why the bite point is very high as for the judder in first and revesre it was like this when bite point was normal ish lol just out of intrest ron would you know what model of gearbox is fitted to my model the reason i ask is because the clutch fork comes out of the side of the box not the top as for sliping non at all many thanks ian
2005 multispace desire 2.0 hdi iron grey
Reply
#4
(25-01-2015, 08:07 PM)m6wrx1980 Wrote:  hi ron thanks for replying yes it cable operated i belive the auto aduster may have broke down explianing now why the bite point is very high as for the judder in first and revesre it was like this when bite point was normal ish lol just out of intrest ron would you know what model of gearbox is fitted to my model the reason i ask is because the clutch fork comes out of the side of the box not the top as for sliping non at all many thanks ian
I don't know myself but I believe the VIN contains details of type of box. Confused
Strawberry flavoured windows  Dodgy
Reply
#5
thanks ron Smile
2005 multispace desire 2.0 hdi iron grey
Reply
#6
UPDATE



just a quick update clutch now done new luk 3 piece fitted along with new clutch fork and diff seals plus guide tube feels like brand new again plus new lower engine mount bit more vibration now on tickover because new mont is much stiffer but can live with that lol only problem i had was the new clutch cable auto adjust cable took too much up firstline ??? so clutch sliped on first trial but luck has it the original cable was not of a sealed type therefore was able to reset the adjustment job done a big thanks to the forum also when i get a bit more spare time i will put a photo and step by step guide together for those who need the info many thanks ian Smile
2005 multispace desire 2.0 hdi iron grey
[+] 1 user says Thank You to m6wrx1980 for this post
Reply
#7
(08-02-2015, 07:15 PM)m6wrx1980 Wrote:  UPDATE



just a quick update clutch now done new luk 3 piece fitted along with new clutch fork and diff seals plus guide tube feels like brand new again plus new lower engine mount bit more vibration now on tickover because new mont is much stiffer but can live with that lol only problem i had was the new clutch cable auto adjust cable took too much up firstline ??? so clutch sliped on first trial but luck has it the original cable was not of a sealed type therefore was able to reset the adjustment job done a big thanks to the forum also when i get a bit more spare time i will put a photo and step by step guide together for those who need the info many thanks ian  Smile

Glad it went well.I do like a happy ending.LUK clutches are the mutts nuts,really top quality. Big Grin
Strawberry flavoured windows  Dodgy
Reply
#8
(08-02-2015, 07:41 PM)ron Wrote:  
(08-02-2015, 07:15 PM)m6wrx1980 Wrote:  UPDATE



just a quick update clutch now done new luk 3 piece fitted along with new clutch fork and diff seals plus guide tube feels like brand new again plus new lower engine mount bit more vibration now on tickover because new mont is much stiffer but can live with that lol only problem i had was the new clutch cable auto adjust cable took too much up firstline ??? so clutch sliped on first trial but luck has it the original cable was not of a sealed type therefore was able to reset the adjustment job done a big thanks to the forum also when i get a bit more spare time i will put a photo and step by step guide together for those who need the info many thanks ian  Smile

Glad it went well.I do like a happy ending.LUK clutches are the mutts nuts,really top quality. Big Grin


cheers ron
2005 multispace desire 2.0 hdi iron grey
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)
Welcome, Guest
You have to register before you can post on our site.


  

Password
  





Search Forums

(Advanced Search)

Latest Threads
New PureTech 110 S&S Flai...
Last Post:Jed Clampit
Today 09:04 PM
» Replies: 3
» Views: 49
What website to pass time...
Last Post:Solent
Today 08:32 PM
» Replies: 0
» Views: 21
Berlingo Parts
Last Post:Sb12
Today 07:56 PM
» Replies: 0
» Views: 25
Rear hub nut torque setti...
Last Post:jj9
Today 07:55 PM
» Replies: 15
» Views: 238
temperatue dial
Last Post:Kokain
Today 05:28 PM
» Replies: 3
» Views: 68
Trip Computer on Type A M...
Last Post:cancunia
Today 03:50 PM
» Replies: 0
» Views: 23
Loud beeping from radio u...
Last Post:nicko
Today 03:49 PM
» Replies: 3
» Views: 110
Ligts won't go off!
Last Post:Berlingos12
Today 02:50 PM
» Replies: 10
» Views: 468
DW8 engine tapping
Last Post:brodfather11
Today 08:30 AM
» Replies: 1
» Views: 74
Washers not working
Last Post:Luis Rosa
Today 07:47 AM
» Replies: 8
» Views: 229

Locations of visitors to this page