Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[Filters & Oil] bleeding fuel
#1
hi there,i,m new to this forum,and I,v just bought a 1.6 hdi vtr 2011 plate,,i have a couple of queries which I hope someone could help me with,1,is there a manual,for this model ,as I,v tried Haynes,and they don't do one after the 60 plate,2,when you change the fuel filter,does it self bleed as there doesent seem to be a bleed bulb,and 3,where is the oil filter,
would appreciate any help,thank you
Reply
#2
1. There isn't a Haynes manual for the current B9 model from 2008 onwards

2. There is a bleed bulb, it on top of the engine just in front of the air filter (you may have to take off the top engine cover if you have one
[Image: P1080215x.JPG]

3. If you look at the turbo on the front of the engine and cast your eyes just to the right and down, you will see a round bowl like fitting coming out at about a 45 degree angle
[Image: watermarked_OF_-__077.jpg]

It takes one of these
[Image: Image.aspx?ID=1357145]
[+] 2 users say Thank You to ntm1275 for this post
Reply
#3
Hello Keith welcome to the forum good to have you with us as ntm wrote and pics look through the threads on here about servicing 1.6 hdi and make sure you follow it it will stop you running in to problem  Smile
                                     Smile  It's too orangey for crow's It's just for me and my dog  Smile

                                                        Heart Heart Love a lot trust a few  Dodgy
 
                                                        

                                        
[+] 1 user says Thank You to Jed Clampit for this post
Reply
#4
(14-02-2015, 10:10 AM)ntm1275 Wrote:  1. There isn't a Haynes manual for the current B9 model from 2008 onwards

2. There is a bleed bulb, it on top of the engine just in front of the air filter (you may have to take off the top engine cover if you have one
[Image: P1080215x.JPG]

3. If you look at the turbo on the front of the engine and cast your eyes just to the right and down, you will see a round bowl like fitting coming out at about a 45 degree angle
[Image: watermarked_OF_-__077.jpg]

It takes one of these
[Image: Image.aspx?ID=1357145]
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)
Welcome, Guest
You have to register before you can post on our site.


  

Password
  





Search Forums

(Advanced Search)

Latest Threads
Reverse light switch prob...
Last Post:Col
Today 07:22 PM
» Replies: 12
» Views: 243
2004 Berlino Aerial
Last Post:Claydontoby92
Today 07:14 PM
» Replies: 0
» Views: 14
2005 2.0 HDI Siemens pump...
Last Post:Woodyrvf750
Today 07:05 PM
» Replies: 0
» Views: 15
Washers not working
Last Post:Silverberlingo
Today 06:54 PM
» Replies: 10
» Views: 268
Fuse is burning all the t...
Last Post:fernandoblas
Today 05:23 PM
» Replies: 12
» Views: 410
HELP! Smashed passenger w...
Last Post:Sootyfoot
Today 04:31 PM
» Replies: 2
» Views: 68
Diagnostic "gear" / Softw...
Last Post:cancunia
Today 04:19 PM
» Replies: 15
» Views: 612
Poor cold startup 1.9
Last Post:Top drive
Today 02:01 PM
» Replies: 38
» Views: 1031
Berlingo Parts
Last Post:malgpz900
Today 10:20 AM
» Replies: 1
» Views: 86
XTR heater control bulb r...
Last Post:Opensauce
Today 09:19 AM
» Replies: 1
» Views: 80

Locations of visitors to this page