Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[Warning Light] Hazard lights not working
#1
Hi everyone.
New member here and also a first time Citroen owner. 
I recently bought a cheap little Berlingo Mk1 ( 2000 registered ) van with just over 200k on the clock.
I'm surprised at how good the little thing is considering age and mileage!!
He's got a few little problems which I'm fixing at the moment.
One problem that has me stuck at the moment is that the hazard warning lights don't work. i have checked the fuse in the cab which is ok. i have also swapped the switch with a second hand one with no difference.
When i press the switch its light goes out and it also stops the indicators from working.
If there's anyone who can point me to where to look next id be grateful
Thanks Martin
Reply
#2
Your symptoms are a sign of a dodgy switch , it switches off the indicators but doesn't switch on the hazards. As you have changed it is the s/hand one OK. ?. I've found a good working on and off a few times sometimes brings the switch back to life. Check all the fuses in the cabin fuse box. (3 I think )

If still not working try the fuses in the engine fuse box.
Reply
#3
It could be a sticky relay of flasher unit
Reply
#4
Thanks for the info brodfather11, I will mess about with the spare switch after work to see if it comes back to life.
Do you jnow what the fuse No's are? My hand book only shows 1 in the cabin ( 27 if I remember correctly ) and nothing for the outside fues box.
Thanks also Iank is the hazard relay and flasher relay the same 1?
M
Reply
#5
(31-01-2016, 01:28 AM)Marty72 Wrote:  Thanks for the info brodfather11, I will mess about with the spare switch after work to see if it comes back to life.
Do you jnow what the fuse No's are? My hand book only shows 1 in the cabin ( 27 if I remember correctly ) and nothing for the outside fues box.
Thanks also Iank is the hazard relay and flasher relay the same 1?
M

Hi Marty, to find the relay have indicators on you will hear it clicking then find which one by touching it you will feel it clicking then put hazards on give it a wiggle about even a light tap. Yes should be same relay for both hazards and indicators. 
Ian
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)
Welcome, Guest
You have to register before you can post on our site.


  

Password
  





Search Forums

(Advanced Search)

Latest Threads
DW8 engine tapping
Last Post:jj9
Today 01:14 AM
» Replies: 3
» Views: 91
Rear window heater repair
Last Post:Silverberlingo
Yesterday 11:38 PM
» Replies: 0
» Views: 25
New PureTech 110 S&S Flai...
Last Post:Jed Clampit
Yesterday 09:04 PM
» Replies: 3
» Views: 57
What website to pass time...
Last Post:Solent
Yesterday 08:32 PM
» Replies: 0
» Views: 32
Berlingo Parts
Last Post:Sb12
Yesterday 07:56 PM
» Replies: 0
» Views: 34
Rear hub nut torque setti...
Last Post:jj9
Yesterday 07:55 PM
» Replies: 15
» Views: 261
temperatue dial
Last Post:Kokain
Yesterday 05:28 PM
» Replies: 3
» Views: 76
Trip Computer on Type A M...
Last Post:cancunia
Yesterday 03:50 PM
» Replies: 0
» Views: 25
Loud beeping from radio u...
Last Post:nicko
Yesterday 03:49 PM
» Replies: 3
» Views: 116
Ligts won't go off!
Last Post:Berlingos12
Yesterday 02:50 PM
» Replies: 10
» Views: 470

Locations of visitors to this page