Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Wiring for Hazard Lights
#1
Hi All,
Does anyone know which connector connects to the hazard light switch??
My berlingo is '08 1.4i no a/c or central locking.......
So i have 3 connectors which all fit the hazard switch.....Brown (6 wire ) Black (4 Wire) or Green (4 wire)??
A brown 6 wire was connected when i bought it ... but hazards werent working....
As previous owner has had the heater matrix replaced i believe console was put back together in a hurry and incorrect wires put into hazard switch.....
MY hazard switch only has 4 pins so i assume the black or green connector should be connected to it.......
Any help much appreciated as i dont want to cross any wrong circuits with the hazard switch and create new problems.....
Wire diagrams or wire  numbers also much appreciated!!!!!

Thanks


Attached Files Thumbnail(s)
   
Reply
#2
Hi Carman without stripping my car out according to the Haynes manual there are 3 wires going to the switch. The wiring is not colour coded you need to look on each wire for a number.
Pin 6 = wire numbered 232
Pin 1 = wire numbered 230
Pin 3 = wire numbered M230 this is the earth.
Hope this helps.
Are we there yet????? No we fecking ain`t  gggggrrrrrrr
Ex 1.6hdi van now 3 seater 1.4 multispace
Reply
#3
HI Tomcat3
Thanks very much for the info ...... much appreciated.
I was struggling to read those numbers on the wires.....and then........

It turns out Citreon/PSA have kindly made this  issue very easy to sort out .....
After days of looking up berlngo dash images i realized each switch has a different colour plastic molded on the back of it... And each connector block is molded from the same plastic......

SO A/C = brown orange moldings
Hazard Lights = black moldings
De-mister = white moldings
Central locking =  green moldings


I missed this because i only removed the hazard light switch (black)  and i dont have cental locking or A/C....
My berlingo is a  08/ 58 plate older model berlingo. Im not sure how far back this colour coding goes
but i hope this helps someone else in a jam someday!!!!!!!!!


Attached Files Thumbnail(s)
   
[+] 1 user says Thank You to carman for this post
Reply
#4
I never realised that , thanks for the tip Big Grin
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)
Welcome, Guest
You have to register before you can post on our site.


  

Password
  





Search Forums

(Advanced Search)

Latest Threads
citroen berlingo alarm
Last Post:sks01773
Today 11:28 AM
» Replies: 0
» Views: 8
Reverse light switch prob...
Last Post:ffrenchie
Today 09:48 AM
» Replies: 6
» Views: 84
Poor cold startup 1.9
Last Post:cancunia
Today 09:03 AM
» Replies: 32
» Views: 744
Washers not working
Last Post:Redjoe100
Today 07:55 AM
» Replies: 4
» Views: 108
peugeot charger
Last Post:3rensho
Today 06:46 AM
» Replies: 3
» Views: 100
Aftermarket radio stalk C...
Last Post:Matt Haigh
Yesterday 11:53 PM
» Replies: 7
» Views: 265
Carpet
Last Post:Shaunchippy95
Yesterday 09:50 PM
» Replies: 0
» Views: 48
2-Button Key Upgrade
Last Post:Matt Haigh
Yesterday 09:24 PM
» Replies: 0
» Views: 49
Fuel consumption
Last Post:ron
Yesterday 06:28 PM
» Replies: 9
» Views: 227
Heyup
Last Post:polar
Yesterday 05:03 PM
» Replies: 7
» Views: 313

Locations of visitors to this page