Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Smoking and lexia
#1
Hi.

I have a 07 1.6 HDI van and Replaced a injector in my van,  The van smoke's really bad now, All i see in rear view mirror is pure smoke.

Do i need to code the injector to the ECU?. And where's the best place to buy a lexia kit from. And which kit should i go for.

Thanks in advance
Reply
#2
What colour smoke?
Reply
#3
White/ grey smoke.
Reply
#4
Was it a new injector? Same numbers?
Reply
#5
(15-04-2016, 05:30 PM)Col Wrote:  Was it a new injector? Same numbers?

2nd hand injector and it was tested and they said it was a good injector, and same number's 0445110239
Reply
#6
There is a guy on this forum that remaps vehicles and he said the 1.6hdi will run if you replace the injectors but not correctly he stated that they do need programing to the vehicle to get it running right.

I hope he will be along soon to advise you.
[+] 1 user says Thank You to polar for this post
Reply
#7
Always wary of 2nd hand. Assuming it's good, was it fitted with the correct new copper washer? Did you get the old washer out?. Seen this cause smoke issues before although usually black smoke. In theory they should be coded but in practice they are usuall ok as a straight swap
Reply
#8
(15-04-2016, 07:50 PM)Col Wrote:  Always wary of 2nd hand. Assuming it's good, was it fitted with the correct new copper washer? Did you get the old washer out?. Seen this cause smoke issues before although usually black smoke. In theory they should be coded but in practice they are usuall ok as a straight swap

New copper washer fitted and old one removed and seat cleaned.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)
Welcome, Guest
You have to register before you can post on our site.


  

Password
  





Search Forums

(Advanced Search)

Latest Threads
12v for lighter front
Last Post:Matija Danko
Today 05:15 PM
» Replies: 19
» Views: 378
Roof noise
Last Post:Veitcast
Today 04:51 PM
» Replies: 4
» Views: 100
Poor cold starting. Whats...
Last Post:ron
Today 04:34 PM
» Replies: 4
» Views: 49
Fuel consumption
Last Post:ron
Today 04:30 PM
» Replies: 7
» Views: 124
Lexia clone that works wi...
Last Post:kennard
Today 04:22 PM
» Replies: 60
» Views: 1898
Repair a manual winder wi...
Last Post:cancunia
Today 03:31 PM
» Replies: 1
» Views: 31
lubricating door
Last Post:cancunia
Today 03:25 PM
» Replies: 4
» Views: 113
1.6 16v petrol cambelt
Last Post:cancunia
Today 03:19 PM
» Replies: 15
» Views: 341
Rear light Cluster
Last Post:Peter Guy
Today 03:13 PM
» Replies: 4
» Views: 102
Door locking but unlocked
Last Post:ricc
Today 02:25 PM
» Replies: 4
» Views: 87

Locations of visitors to this page