Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Centre Storage Bin (XTR)
#1
Hi folks

I like the look of the centre storage bin in the XTR that is between the seats.  How are these mounted?  I am wondering what I would need to buy to install one of these in a VTR.

Thanks

Andy

MIGHT have just found the answer in the camping thread - http://www.berlingoforum.co.uk/thread-40...ml#pid3087
Reply
#2
Hi Andy,
I too liked the look of the centre console for my old Pug Partner (2012) which had a big gap between the front seat, so I bought one of ebay and then worried how to fit it.
What I found was under the scabby bit of carpet between the seats were a variety of small bolts holding down the plastic thing in this space. I simply removed two of these, got some longer ones out of the parts bin then drilled 2 holes in the bottom of the bin which lined up perfectly and secured the bin to the car - was good enough to last 3 years before I swapped the pug for a bingo, which had said console already fitted. So now I have a spare roll top console in the garage.....
[+] 1 user says Thank You to Mr Keef for this post
Reply
#3
Ooh! That's interesting. I will have a look at the car when it lands here.
Reply
#4
There's a plastic plate attached to the floor. The storage bin clips into it. If you've ever clipped a ski boot into a ski then it's exactly the same - there's a tongue sticking out of the bin's front edge that slots into a slot. Then you clunk the back end in and it clicks into place. To remove it, lift a handle on its back edge then lift from the back.

They're very expensive from Citroen if not already fitted. They work very well though. I've removed mine a few times, when carrying loads especially. The front passenger seat won't fold flat while it's in place as the arm rest hits it. So fixing anything in permanently may be a problem.
Reply
#5
[quote pid='86525' dateline='1460912229']
  I've removed mine a few times, when carrying loads especially.  The front passenger seat won't fold flat while it's in place as the arm rest hits it.  So fixing anything in permanently may be a problem.
[/quote]

Was never a problem in my Pug - the front seat folded forward flat no issues with bin in place, not that was something I did so often(like twice perhaps with some fencing panels) - in 3 years I never had the need to remove it.
Reply
#6
It will fold, but not fully. The arm-rest hits the box before it goes flat. Without the box it will drop about another few inches, plus it's flat which is important if you're going to put anything on top of it. If you put anything on top like this then the armrest and storage box would be taking the weight. If you didn't have armrests then it wouldn't be a problem - I don't know whether they all do.

I regularly strip out all the back seats, flatten the front and use mine to collect a pallet or two of boxes for my small business. After a quick hoover out it's back to being a nice car again. Mine earns the "Multi" in its model name!
Reply
#7
Just tried it & of course you're perfectly correct, however to remove the armrest is 5 seconds and no tools, so is not a show stopper - depends how often you're going to fold flat the front seat, and whether you want it completely flat.
[+] 1 user says Thank You to Mr Keef for this post
Reply
#8
I didn't even know you could remove the armrest! I learn more every day.

What's the removal technique? I'll have a play later.

I fold mine about every fortnight usually, when it needs to go into van mode.
Reply
#9
(18-04-2016, 10:46 AM)doofer Wrote:  I didn't even know you could remove the armrest! I learn more every day.

What's the removal technique? I'll have a play later.

I fold mine about every fortnight usually, when it needs to go into van mode.
There's a little button to press on the plastic rim on the seat. If you put the arm rest upright it's on the forward facing edge. You press and the arm rest can be pulled out.

Sent from my SM-T810 using Tapatalk
2013 XTR 1.6 HDi 90

[+] 3 users say Thank You to MarkT for this post
Reply
#10
Oooh yes. Press, pull and wiggle and there you go.

Brill - that saves me pulling the box out every time I want to fold the seat.
[+] 1 user says Thank You to doofer for this post
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)
Welcome, Guest
You have to register before you can post on our site.


  

Password
  





Search Forums

(Advanced Search)

Latest Threads
Ncb help
Last Post:Silverberlingo
Today 10:26 PM
» Replies: 4
» Views: 139
Saying Hello
Last Post:Jed Clampit
Today 10:25 PM
» Replies: 1
» Views: 19
1.6 hdi 90bhp Turbo and i...
Last Post:Floydster
Today 07:48 PM
» Replies: 3
» Views: 135
1.6 16v petrol cambelt
Last Post:sks01773
Today 07:37 PM
» Replies: 12
» Views: 250
Heated wing mirrors
Last Post:Trevor
Today 07:06 PM
» Replies: 3
» Views: 82
2025 Diesel Ban
Last Post:Tree
Today 06:17 PM
» Replies: 15
» Views: 345
Hello
Last Post:Johny555
Today 06:04 PM
» Replies: 1
» Views: 19
Roof noise
Last Post:Veitcast
Today 05:48 PM
» Replies: 0
» Views: 28
Fuel consumption
Last Post:Opensauce
Today 05:37 PM
» Replies: 3
» Views: 53
Lexia clone that works wi...
Last Post:kennard
Today 02:59 PM
» Replies: 58
» Views: 1840

Locations of visitors to this page