Hi, i have had problems with my 2002 berlingo 1.9d just would like to know how much pressure is supposed to build up when priming the system? a small amount of fuel seeps out when pumping and although you can feel pressure build up the pump can still be depressed all the way down. would this cause starting/running problems?
If fuel can leak out air can get in causing starting and running problems. As you prime the pump it should get firmer
( this is getting into frankie howard territory now)
Are we there yet????? No we fecking ain`t gggggrrrrrrr
Ex 1.6hdi van now 3 seater 1.4 multispace
The following 1 user says Thank You to Tomcat3 for this post:1 user says Thank You to Tomcat3 for this post
have changed the fuel filter housing, primed the system, still will not start for more than a few seconds. then it just turns over and sounds like its backfiring!
21-04-2016, 06:33 PM
(This post was last modified: 21-04-2016, 06:34 PM by geoff.)
Have you primed / bled the main injector pump ? Worth doing as easy and sounds like your issue ( once the leak is sorted of course ).
The following 1 user says Thank You to geoff for this post:1 user says Thank You to geoff for this post
will find out how to do and then try it tomorrow! Thanks.