Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
HELP! can't get correct gear link rod for 1.6 16v petrol
#1
hoping someone on here can help or has experience of this issue. One of the smaller gear link rods has failed on my 2001 1.6 16v petrol model. I sourced the "correct" part from the local dealership - 2454 F5 - but it doesnt fit. The ends are 10mm and the ball joints on my linkage are 13mm on both ends. As far as i can tell, the linkage parts are original (unless the whole system was replaced with something non-standard when the car was virtually new...).
Dealers (both Citroen and Peugeot) have checked part listings for me but nothing has turned up. AEP were very helpful and checked a dozen or so different parts; but all had 10mm ends.

Has anyone come across this before? Is there a part of the same dimensions for another vehicle with 13mm ends i can source...?

Obviously i could replace more parts or the whole system - but I'm loathe to go to that expense when all i need is a £20 bit of meccano!
Reply
#2
Years ago I had similar problem on my vw. Ended up cutting in half link rod.
Then threaded the ends . Put coupling nut with additional 2 nuts at the end of coupling nut.
Nut "sandwich" . With this design you can extend/shorten rod as you desire.
http://www.ebay.co.uk/itm/Steel-Stud-Con...1953325186

But if you have problem with 13mm ball end. Then I don't have solution for that....


Best regards,
brajomobil
Reply
#3
I've replaced a few of the linkages on mine and my niece's car and never seen any different sizes. Are you saying that someone may have replaced the gearbox linkage for some with bigger ball ends ? You could search google or ebay for gas strut end fittings and make your own from threaded bar.
So where does this bit go then ?
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)
Welcome, Guest
You have to register before you can post on our site.


  

Password
  





Search Forums

(Advanced Search)

Latest Threads
2.0 HDi fuel issues as pe...
Last Post:brodfather11
Today 02:05 PM
» Replies: 13
» Views: 217
Haynes manuals - which on...
Last Post:ffrenchie
Today 01:54 PM
» Replies: 4
» Views: 44
Amateur radio
Last Post:ghost123uk
Today 01:41 PM
» Replies: 24
» Views: 8208
peugeot charger
Last Post:grig
Today 01:05 PM
» Replies: 0
» Views: 12
Poor cold startup 1.9
Last Post:Top drive
Today 12:52 PM
» Replies: 17
» Views: 521
Roof noise
Last Post:Shawks
Today 12:03 PM
» Replies: 6
» Views: 165
Heyup
Last Post:ffrenchie
Today 11:08 AM
» Replies: 6
» Views: 281
Fuel flap
Last Post:3rensho
Today 10:01 AM
» Replies: 1
» Views: 42
Poor cold starting. Whats...
Last Post:geoff
Today 09:18 AM
» Replies: 10
» Views: 180
lubricating door
Last Post:ghost123uk
Today 09:13 AM
» Replies: 7
» Views: 166

Locations of visitors to this page