Thread Rating:
  • 22 Vote(s) - 2.95 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Remote Central Locking
#1
I have just been given a new 61 plate berlingo from work WITHOUT remote locking, lol.

what i want to know, is it easy enough to fit the remote locking on either from citroen direct eg, is it just a case they sell you a fob plus the programming???? or can i fit an after market one like a toad RK30??

If so has anyone done it that could provide some help as to fitting etc, im fairly handy with a soldering iron and heatshrink, just need to be pushed in the right direction.
Reply
#2
To install fully factory remote locking system is expensive.
It's better to install aftermarket door actuators but control system.....
you can use original (key transmitter+battery+reciever).
If there's no reciever in a Com2000 unit you must change whole unit.
After all these installations option "central lock" must be activated by Lexia.
Reply
#3
(28-09-2011, 09:24 AM)pk7478 Wrote:  To install fully factory remote locking system is expensive.
It's better to install aftermarket door actuators but control system.....
you can use original (key transmitter+battery+reciever).
If there's no reciever in a Com2000 unit you must change whole unit.
After all these installations option "central lock" must be activated by Lexia.

It already has central locking, just no remote, its optional, all i want to do is have keyless entry.

Reply
#4
You wanna do it by yourself ?
Reply
#5
(28-09-2011, 04:00 PM)andymiller6891 Wrote:  It already has central locking, just no remote, its optional, all i want to do is have keyless entry.

If the sensors are fitted then you should just need the key & programming. Not cheap from a dealer - mine quoted me about £140ish (£70 for the key & another £70 to program it). If you get the key you could have it programmed somewhere else for a lot less.

Reply
#6
Quote:If the sensors are fitted then you should just need the key & programming. Not cheap from a dealer - mine quoted me about £140ish (£70 for the key & another £70 to program it). If you get the key you could have it programmed somewhere else for a lot less.

how would i know if the sensors are there???
Reply
#7
Pop in to your local dealer.

Sent from my GT-I5700 using Tapatalk
Reply
#8
(28-09-2011, 06:59 PM)andymiller6891 Wrote:  
Quote:If the sensors are fitted then you should just need the key & programming. Not cheap from a dealer - mine quoted me about £140ish (£70 for the key & another £70 to program it). If you get the key you could have it programmed somewhere else for a lot less.

how would i know if the sensors are there???

VIN to PM

Reply
#9
Quote:VIN to PM

Where would i find the vin, is it on the plate under the bonnet???

Reply
#10
It's on your V5
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Welcome
You have to register before you can post on our site.

Username:
  

Password:
  




[-]
Search
(Advanced Search)

[-]
Latest Threads
Berlingo 2007 1.6 hdi - intermittent sticky acce...
Last Post: Vossy1
Yesterday 04:37 PM
» Replies: 6
» Views: 306
Battery upgrade
Last Post: evdama
Yesterday 03:58 PM
» Replies: 0
» Views: 49
Wanted: 2003 M59 steering rack
Last Post: evdama
Yesterday 12:45 PM
» Replies: 1
» Views: 38
roof rack with slats
Last Post: BigVtwin996
Yesterday 09:22 AM
» Replies: 2
» Views: 158
M59 Throttle pedal
Last Post: Romahomepete
Yesterday 07:32 AM
» Replies: 4
» Views: 153
Fault Code B0079 Airbag
Last Post: Cumbrian
26-03-2024 03:06 PM
» Replies: 1
» Views: 195
Timing pin sets
Last Post: evdama
26-03-2024 11:50 AM
» Replies: 10
» Views: 265
injector plastic neck broken
Last Post: magoo1
25-03-2024 05:15 PM
» Replies: 7
» Views: 123
Multispace Forte for sale
Last Post: ffrenchie
25-03-2024 01:58 PM
» Replies: 1
» Views: 115
Spare wheel
Last Post: chrisl
24-03-2024 09:18 PM
» Replies: 17
» Views: 2042

[-]
Recent Visitors
Locations of visitors to this page

[-]
Hosting by

QuickHostUK