It might be very windy and noisy with them open though. The idea of the tilt opening is to let air pull through without getting turbulence.
They might be noisy even when shut, from all the edges.
20-06-2016, 04:38 AM
(This post was last modified: 20-06-2016, 04:47 AM by Luis Rosa.)
I think they have to be bonded (glued) to the van upon installation. At least is what I can deduce from the description. The old ones, the mounts and the rubbers go out, and these are glued in place. These are specific for the B9 model, and have this sliding mechanism, that lets you "open" the rear windows, this is not about tinting or making the windows darker. Actually this may also be a question, if the tinting on these will match the original tinting that my peugeot brings. You can see that the shape, is exactly the same as the original windows. Unfortunately none of you has tried them yet...my fear is that the bonding can get complicated, hence the question. But yes, it would be nice to have such type of windows, specially for stopping the kids complaints...
Think you will find that they are designed for the van. They require a hole to be cut out, then the new window is bonded in.
04-07-2016, 09:22 PM
(This post was last modified: 04-07-2016, 09:24 PM by Jed Clampit.)
Ah I see do you know I never noticed the sliding part doh ?? ? ?
If you unbolted the window from a Multispace and removed the rubber seal then what you'd have is a van with a hole in. So you could fit one to a Multispace, but I wouldn't bother.
I'd hope it includes some kind of trim to cover the sharp edges around it on the inside.
Even if you had a van and wanted windows, I'm sure you could add the Multispace windows pretty easily just using Citroen parts and a power saw.