I need to replace the electric window motor so access is required
If it's the same as the mk1 the cover needs to come off the top of the door handle as you need to undo the screws under there.
2010 (B9) Berlingo Multispace XTR HDi 112 - Kyanos Blue
Previously - 2002 (M49) Berlingo Multispace 2.0 HDi Diesel - Arctic Steel
16-10-2011, 10:25 AM
(This post was last modified: 16-10-2011, 10:48 AM by Newspaperman.)
Right so I have torx type screws in the door handle what about the card itself popper clips?
Ok I set to this morning its quite easy;
Step 1 Remove Pull Handle trim with a flat blade driver and the trim unclips
Step 2 Unscrew the 2 x Torx Screws on handle assembly
Step 3 Prise off the the Door Open Handle trim just clipped in place
Step 4 Unclip door card held onto door by 10 or so popper clips
Step 5 CARE dont pull door card too far as speaker is mounted on door card
Step 6 Disconnect speaker and manoeuvre door card over the lock button
Step 7 Revealed white foam damp membrane and door card removed
Easy when you know how!
Thanks for the tips on how to chaps and chappasses!
The following 1 user says Thank You to Newspaperman for this post:1 user says Thank You to Newspaperman for this post