[Warning Light] Cruise control (again), yes again, but working (1.6hdi no FAP/DPF, 57reg)

[saskak]

Excellent news & one reason less for me to not get a 1.6 M59!
The km/h in the cc window looks to be permanent, is there a similar display you can take from the pug cluster, it looks to have a window in the same place, perhaps the odo too? I'm surprised that the original didn't have mph on an inner scale, clearly they never expected a kph rhd car to be driven in the UK.

Brajo, looks like your quest may be over too.

It is not permanent. Where it reads km/h slightly above (1mm) there is another part, where if I shine a torch on it it says miles/h. So, it is not permanent, it has to be somehow programmed to be miles rather than kilometers.
I have searched everywhere for a RHD cluster, but no luck.

Cheers,
saskak

[cancunia]

Interesting stuff, I did wonder if there was a mph possibility but the pictures seemed to indicate otherwise. The Pug display that you bought seems to have a window in the same place as the CC?

[saskak]

Interesting stuff, I did wonder if there was a mph possibility but the pictures seemed to indicate otherwise. The Pug display that you bought seems to have a window in the same place as the CC?

I was also asking myself before if the small CC lcd can only display km/h, but the option is there for the mph. On the photo the km/h sits a bit lower and straight above is the Mph, which is not lit.

[saskak]

Two more photos of the new face from Peugeot 206 automatic black display with the CC LCD.
The coolant temp is slightly off by a couple of degrees, normally sits on ~80C, I might reposition it later.

   
   

[saskak]

Interesting stuff, I did wonder if there was a mph possibility but the pictures seemed to indicate otherwise. The Pug display that you bought seems to have a window in the same place as the CC?

The Peugeot 206 cluster has an LCD display on exactly the same spot. The car was automatic and on that display it shows whether the car is in drive, park, etc. I think it shows big letters D, P, R.

[cancunia]

This may sound really daft, and perhaps you've already looked.. You can change the units from miles to km on the central display if you have the trip computer, does that work in this case?

[saskak]

This may sound really daft, and perhaps you've already looked.. You can change the units from miles to km on the central display if you have the trip computer, does that work in this case?

Thanks for the suggestion, but I tried that one already. I can change the trip computer to MPH or l/km, but that makes no difference to the odometer. I fitted a display from Citroen C5/C8, the green one. The problem with that one is that my DiagBox/Lexia/PP2000 does not recognise it and cannot change the parameters from the software, it says something down the lines of configuration not accessible or something similar. I think I bought one additional that was from Peugeot 307 that was recognisable and maybe I can do something with that. That will be my next step before calling the mileage correction people with their eeprom dumps.

I think from the forums in peugeot, the 307, 206 etc., can change the odometer with the push of the buttons, but for me it does not really do anything.

Cancunia, if you have the 3-line MFD type B, if you change the MPG to l/km does your odometer also change?

[cancunia]

I have a 3 line display like yours, it's a green ex C5 display, so I doubt pressing the buttons will change anything. I do have an Orange 3 line display also, but not tried that as I preferred the green one.
To be honest, I've not used Lexia on my MFD as it came already configured with the Trip Computer and didn't want to fix something that wasn't broken! On my 2004 2.0, Cruise Control is an option but not the Trip Computer, so I've left it well alone while it's working.

[saskak]

I have a 3 line display like yours, it's a green ex C5 display, so I doubt pressing the buttons will change anything. I do have an Orange 3 line display also, but not tried that as I preferred the green one.
To be honest, I've not used Lexia on my MFD as it came already configured with the Trip Computer and didn't want to fix something that wasn't broken! On my 2004 2.0, Cruise Control is an option but not the Trip Computer, so I've left it well alone while it's working.

Sure, no worries. I will swap all the MFD that I got and check with the DiagBox if I can configure anything. Otherwise is contacting the mileage correction people to see if they can program the cluster to show miles. I have seen this done before on one of the forums, mhauto or something.
I will report back if I can do it with Lexia/PP2000 and a different MFD.

[brajomobil]

Two more photos of the new face from Peugeot 206 automatic black display with the CC LCD.
The coolant temp is slightly off by a couple of degrees, normally sits on ~80C, I might reposition it later.

So instrument cluster with CC lcd from Peugeot 206 is not working in berlingo ?

Best regards,
brajomobil