Thread Rating:
  • 26 Vote(s) - 3.12 Average
  • 1
  • 2
  • 3
  • 4
  • 5
KNOCKING/VIBRATION NOISE COMING FROM NSF
#1
Hi folks i have recently replaced near side front spring after it had snapped then there was a knocking noise, so i changed the drop link hoping this would cure it as there was a tiny bit of play in it but it is still doing it.

it is a strange one as it doesnt do it all the time and tends to do it mainly over small bumps which are frequent then sometimes it will send a vibration through the car as if it is rattling against a body panel or the bulk head. i have had a look and cant physically see anything and i thought it might have been the wheel arch liner as there is a clip missing but i have replaced it now and the fault still persists, so if any one could shed some light for me it would be greatly appreciated as i hate annoying noises

i feel like hitting my :brickwall:
Reply
#2
check if the strut is seated at the bottom properly.otherwise the top of the spring hits the inner wing.you will see where it rubbs the underseal off if this is the case.
[+] 1 user says Thank You to lorraine for this post
Reply
#3
Might sound a bit thick here but how do you mean seated properly.
Reply
#4
If the spring is in the cups correct i think Lorraine means
[+] 1 user says Thank You to muply for this post
Reply
#5
OK thanks for that forgot to mention as well I think it is worse when someone is sat in front passenger seat
Reply
#6
(16-03-2012, 05:05 AM)BerlingoHDI Wrote:  Might sound a bit thick here but how do you mean seated properly.

hi.is the lug on the bottom of the strut seated between the clamp on the bottom.it stops the leg spinning when the wheel is turned.there are two more thicker ones just above it.hope this helps
[+] 1 user says Thank You to lorraine for this post
Reply
#7
the roll bar is mounted on the chassis on two rubber bushes in addition to the droplinks, i woluld be looking at those if it was me.
[+] 1 user says Thank You to Gemmima for this post
Reply
#8
Worth checking the track rod end and balljoint too IMO. Jack the car up and see if theres any play in the wheel Smile

Sent from my BlackBerry 9800 using Tapatalk
'04 Peugeot Partner HDi LX. Lows, Leaks and Wellers. Now matt grey and dent free Smile

[+] 1 user says Thank You to PeteA for this post
Reply
#9
Thanks everyone for all your opinions, i have checked roll bars and track rod ends etc and all seem to be fine, i will check the lug on the bottom of the strut tomorrow as lorraine said, will be back to let you all know as it is starting to annoy me now.
Reply
#10
My knock was a track rod end, wasn't picked up on mot either!
1.9d Mk2 (M59/BE4/5) with battle scars from a conservatory attack. Previously owned a 1.4i Mk2 Forte.Confusedalut:
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)
Welcome, Guest
You have to register before you can post on our site.


  

Password
  





Search Forums

(Advanced Search)

Latest Threads
Ncb help
Last Post:Silverberlingo
Today 10:26 PM
» Replies: 4
» Views: 139
Saying Hello
Last Post:Jed Clampit
Today 10:25 PM
» Replies: 1
» Views: 19
1.6 hdi 90bhp Turbo and i...
Last Post:Floydster
Today 07:48 PM
» Replies: 3
» Views: 135
1.6 16v petrol cambelt
Last Post:sks01773
Today 07:37 PM
» Replies: 12
» Views: 250
Heated wing mirrors
Last Post:Trevor
Today 07:06 PM
» Replies: 3
» Views: 82
2025 Diesel Ban
Last Post:Tree
Today 06:17 PM
» Replies: 15
» Views: 345
Hello
Last Post:Johny555
Today 06:04 PM
» Replies: 1
» Views: 19
Roof noise
Last Post:Veitcast
Today 05:48 PM
» Replies: 0
» Views: 28
Fuel consumption
Last Post:Opensauce
Today 05:37 PM
» Replies: 3
» Views: 53
Lexia clone that works wi...
Last Post:kennard
Today 02:59 PM
» Replies: 58
» Views: 1840

Locations of visitors to this page