Thread Rating:
  • 12 Vote(s) - 2.5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Rattling Rear Door
#1
Hi, getting a intermittent rattle from rear door / rear window area- cannot seem to locate exact spot. Anyone suffered from this ? If so, how best to fix it ? Thanks.
Former 2011 Mk3 XTR owner Confusedalut:
Reply
#2
Have you checked the lock sometimes comes loose and gives a rattle;0)
[+] 1 user says Thank You to blingo driver for this post
Reply
#3
As blingo said. Check the locks. My boot lock plate bolts loosened and the boot used to rattle over bumps etc.

Sent from my GT-I9000 using Tapatalk 2
1.9d Mk2 (M59/BE4/5) with battle scars from a conservatory attack. Previously owned a 1.4i Mk2 Forte.Confusedalut:
[+] 1 user says Thank You to divingscubaboy for this post
Reply
#4
It now seems more likely to be coming from the top rear corner ( passenger side ) possibly eminating from behind the aperture which the central seat belt appears out of.
Former 2011 Mk3 XTR owner Confusedalut:
Reply
#5
(24-04-2012, 08:13 PM)taxi Wrote:  It now seems more likely to be coming from the top rear corner ( passenger side ) possibly eminating from behind the aperture which the central seat belt appears out of.

Hi,
I think I had the same problem,
only after I had let a friend of mine drive my car and sat at the back sit
I found out that my noise was coming from a plastic unit the is located on the beam between the front and back door.
if you open the door there is a pin closer to the top of the door that will go to the plastic part on the beam.

It took me while to find it.
Smile

Let me know if this is it.
[+] 1 user says Thank You to Gal for this post
Reply
#6
We had a rattle early on - it was the catch on the sliding door window, the nut wasn't quite tight enough.
The Bus: 2009 MkIII VTR HDi 90, 7 Seater
[+] 1 user says Thank You to Guanajuato for this post
Reply
#7
(19-04-2012, 10:49 PM)divingscubaboy Wrote:  As blingo said. Check the locks. My boot lock plate bolts loosened and the boot used to rattle over bumps etc.

Happened to me too, I had to buy a cheap socket-set just to get a small range of the weirdo (torx?) doodads just to tighten things up Smile
Reply
#8
Sorry for the late replay.

This is a picture of the part that was doing

[Image: 14o7ii9.jpg].
[+] 2 users say Thank You to Gal for this post
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)
Welcome, Guest
You have to register before you can post on our site.


  

Password
  





Search Forums

(Advanced Search)

Latest Threads
Reverse light switch prob...
Last Post:ffrenchie
Today 09:48 AM
» Replies: 6
» Views: 78
Poor cold startup 1.9
Last Post:cancunia
Today 09:03 AM
» Replies: 32
» Views: 730
Washers not working
Last Post:Redjoe100
Today 07:55 AM
» Replies: 4
» Views: 97
peugeot charger
Last Post:3rensho
Today 06:46 AM
» Replies: 3
» Views: 92
Aftermarket radio stalk C...
Last Post:Matt Haigh
Yesterday 11:53 PM
» Replies: 7
» Views: 260
Carpet
Last Post:Shaunchippy95
Yesterday 09:50 PM
» Replies: 0
» Views: 43
2-Button Key Upgrade
Last Post:Matt Haigh
Yesterday 09:24 PM
» Replies: 0
» Views: 43
Fuel consumption
Last Post:ron
Yesterday 06:28 PM
» Replies: 9
» Views: 226
Heyup
Last Post:polar
Yesterday 05:03 PM
» Replies: 7
» Views: 312
Amateur radio
Last Post:nicko
Yesterday 04:06 PM
» Replies: 25
» Views: 8293

Locations of visitors to this page