21-12-2012, 01:40 PM
(This post was last modified: 21-12-2012, 02:10 PM by TarkMalbot.)
I think this missing linkage might have something to do with it. LOL
First thing I have done is order a new rod as I know I will need one of them as a minimum:
I replaced one similar on my niece's Saxo, like a dumbell. The old one had plastic inserts in the ends and the new one was metal, much firmer. It was easy enough just a click off, click on with a bit of grease to ease the process. The new one for the Saxo only cost about £10 from the main dealer.
So where does this bit go then ?
All the motor factors in the area said only the main dealer sells them and they quoted me £17 + VAT.
I found the same part number available for £13 inc VAT and P&P from the site above so will see how I get on when that arrives.
Plenty on ebay , even sell full kit.
I believe it quite a common problem
Arrived this morning. Fitted in seconds leaning over the engine in the rain. Sorted.
The following 1 user says Thank You to TarkMalbot for this post:1 user says Thank You to TarkMalbot for this post