Hi, it's not actually shown here but looks like it will follow the loom (EM02S)down the rh pillar then over the dash board to the radio.
2006 2.0hdi 600 with bench seat.
I put a pioneer unit into my mk1, the end of the antenna cable is different. The original unit had a male connection and the pioneer has a female connection. (Or vice versa) A short piece (10mm?) of bare copper cable inserted does the job. It connects the females together.
Remove the old unit and tie or tape a piece of string to the old cable. Remove the A frame plastic cover beside the windscreen and pull the old cable and string through, the rest is dead easy. Connect the new one and pull the string back through , it'll save a lot of bother guddling behind the dash.
The following 1 user says Thank You to brodfather11 for this post:1 user says Thank You to brodfather11 for this post