[HOW TO] Change bulbs on Multi-function Display Unit
|
Posts: 498
Threads: 30
Thanks Received: 99 in 44 posts
Thanks Given: 40
Joined: Sep 2010
Location: Southend - On - Sea
Reputation:
4
16-10-2010, 10:00 PM
(This post was last modified: 17-10-2010, 08:21 AM by lemsworld.)
The illumination on my Multi-function Display Unit went dull so this is how i replaced the bulbs which by the end the results are clear to how much more lit up the Display Unit is by the end of this process
This took me 5 to 10 minutes
At the end of changing the bulbs you will need to set the clock and date
Tools needed:
Torx T20 to remove the Display Unit
Your fingers to carefully prise off the multi-function display surround from the facia (Unless you know another way)
Step 1:
carefully prise off the multi-function display surround from the facia
[Image: IMG_1327.jpg]
[Image: IMG_1328.jpg]
Step 2:
Undo the two Torx screws
[Image: IMG_1330-1.jpg]
Step 3:
Undo the plug on the back
[Image: IMG_1331.jpg]
Push the button on the top to release the lock arm
[Image: IMG_1332.jpg]
[Image: IMG_1333.jpg]
[Image: IMG_1334.jpg]
Step 4:
Remove the plug
[Image: IMG_1335.jpg]
Step 5:
These are the three bulbs on the back on the display unit
[Image: IMG_1336.jpg]
Turn the bulbs anti-clockwise to release
[Image: IMG_1337.jpg]
Posts: 498
Threads: 30
Thanks Received: 99 in 44 posts
Thanks Given: 40
Joined: Sep 2010
Location: Southend - On - Sea
Reputation:
4
Remove the old bulb
[Image: IMG_1338.jpg]
Step 6:
Fit the new bulbs where needed
[Image: IMG_1339.jpg]
[Image: IMG_1340.jpg]
Step 7:
Reattach the plug
[Image: IMG_1341.jpg]
and lift up the lock arm back to original position
[Image: IMG_1342.jpg]
[Image: IMG_1343.jpg]
Step 8:
Put the display unit back lining it up with the black notch to get it in the right place
[Image: IMG_1344.jpg]
put the two screws removed earlier back and tighten them
[Image: IMG_1346.jpg]
Step 9:
Put the display surround back by placing it over and pushing down until it clips back in
[Image: IMG_1349.jpg]
The following 26 users say Thank You to lemsworld for this post:26 users say Thank You to lemsworld for this post
• Andre, andrea, andy-womble, Big_Jim, Cherrie1888, chronyx, DiveTramp, Eizoox15, j90xxx, Korky, minimick, mrak, Mrrivers, Ol'Jeffers, philip, redan, RolyG, Shawks, Siontrack, Stevo, Tpeti, ulysses, Wakeskate, Wakou, wizard, Z650
Posts: 1,884
Threads: 147
Thanks Received: 387 in 254 posts
Thanks Given: 263
Joined: Sep 2010
Location: London
Reputation:
11
Great contribution, thanks a lot for the tut Lliam, i just hope more people come here so that they are able to use it.
The following 1 user says Thank You to Andre for this post:1 user says Thank You to Andre for this post
• Wakou
Posts: 31
Threads: 7
Thanks Received: 8 in 4 posts
Thanks Given: 0
Joined: Oct 2010
Location: Helensburgh, Scotland
Reputation:
0
Great pictures, don't need to do this yet but its good to know how. bigsacs
•
Posts: 30
Threads: 5
Thanks Received: 1 in 1 posts
Thanks Given: 0
Joined: Sep 2010
Location:
Reputation:
0
22-10-2010, 09:34 PM
(This post was last modified: 22-10-2010, 09:34 PM by Father Ted.)
Citroen (well PSA) dash bulbs seem to be very weak and prone to failure.
Each Citroen I have had to do dash bulbs on I have replaced with LED units for longer life.
Citroen (well PSA) dash bulbs seem to be very weak and prone to failure.
Each Citroen I have had to do dash bulbs on I have replaced with LED units for longer life.
•
Posts: 498
Threads: 30
Thanks Received: 99 in 44 posts
Thanks Given: 40
Joined: Sep 2010
Location: Southend - On - Sea
Reputation:
4
I will keep it in mind to get LED's next time. Thanks
•
Posts: 850
Threads: 52
Thanks Received: 82 in 67 posts
Thanks Given: 9
Joined: Sep 2010
Location: Kent
Reputation:
0
Thanks for the very useful guide, especially as this is on my "to do" list. Are LEDs available (if these are a better bet) as a straight swap?
2005 Berlingo Multispace 1.6i Desire (Iron Grey)
If everything seems to be going well, you have obviously overlooked something.
•
Posts: 8
Threads: 3
Thanks Received: 0 in 0 posts
Thanks Given: 0
Joined: Jan 2011
Location:
Reputation:
0
Thanks for that it's great to see it being done, 1 question as I'm a little this thick are they special bulbs or can they be bought at any car shop?
•
Posts: 1,884
Threads: 147
Thanks Received: 387 in 254 posts
Thanks Given: 263
Joined: Sep 2010
Location: London
Reputation:
11
You should be able to pick them up at any car shop. From memory, they are similar to these LINK. But you could always just take one into your local motor shop and they should be able to match them. No need to be paying more than 60-80p.
•
Posts: 1,709
Threads: 52
Thanks Received: 316 in 279 posts
Thanks Given: 87
Joined: Oct 2010
Location: Switzerland
Reputation:
5
Wow, nothing like pictures!! Thanks for the HOW-TO guide. BTW what year/model is that. Mine looks a bit different.
2010 Berlingo Multispace HDi 110 with FAP. Persamos green.
•
|
Users browsing this thread: 1 Guest(s)
|
Welcome
|
You have to register before you can post on our site.
|
Latest Threads
|
Berlingo 2007 1.6 hdi - intermittent sticky acce...
Last Post: Vossy1
Yesterday 04:37 PM
» Replies: 6
» Views: 306
|
Battery upgrade
Last Post: evdama
Yesterday 03:58 PM
» Replies: 0
» Views: 49
|
Wanted: 2003 M59 steering rack
Last Post: evdama
Yesterday 12:45 PM
» Replies: 1
» Views: 38
|
roof rack with slats
Last Post: BigVtwin996
Yesterday 09:22 AM
» Replies: 2
» Views: 158
|
M59 Throttle pedal
Last Post: Romahomepete
Yesterday 07:32 AM
» Replies: 4
» Views: 153
|
Fault Code B0079 Airbag
Last Post: Cumbrian
26-03-2024 03:06 PM
» Replies: 1
» Views: 195
|
Timing pin sets
Last Post: evdama
26-03-2024 11:50 AM
» Replies: 10
» Views: 265
|
injector plastic neck broken
Last Post: magoo1
25-03-2024 05:15 PM
» Replies: 7
» Views: 122
|
Multispace Forte for sale
Last Post: ffrenchie
25-03-2024 01:58 PM
» Replies: 1
» Views: 114
|
Spare wheel
Last Post: chrisl
24-03-2024 09:18 PM
» Replies: 17
» Views: 2042
|
Recent Visitors
|
|
Hosting by
|
|
|