Thread Rating:
  • 3 Vote(s) - 2 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Reversing light switch help
#1
Hi can anyone help me with my reversing light switch?

I have found the switch to be faulty and have purchased the correct replacement part. only problem is it looks impossible to replace!

The Haynes manual tells you to unscrew it like it easy except thats from a position with the transmission off the engine and the clutch release arm disconnected (the release arm is the reason i cant get at it with a 22mm long socket)

does anyone know of a way of doing this without taking the whole engine apart? its a 2001 1.9d dw9 (i think) with the BE3/5 transmission.

If not it will have to go to the shop as i dont have the time/equipment or experience to tackle this. Any idea on cost?

Thanks
Ricky
Reply
#2
I wouldn't bother unless you reverse a lot in the dark, it's not a requirement to have a reversing light for the MOT test in UK.
So where does this bit go then ?
Reply
#3
(05-12-2013, 07:54 PM)ffrenchie Wrote:  I wouldn't bother unless you reverse a lot in the dark, it's not a requirement to have a reversing light for the MOT test in UK.

Interesting i just assumed it was a fail. well that takes the pressure of a little, would still like to get it sorted if anyone has any tips.
Thanks
Reply
#4
Back in the 60's and 70's we used to fit a bloomin' great foglight on the back of the car
to achieve the 'rally' look.Then the law changed and the maximum wattage for any rear mounted
light used as a reversing light was, I think, 26 watts. Now we have very bright LED units I think
one or two of those on the rear would make a nice reversing lamp. To avoid the hassle of replacing
the existing switch, if you are sure it's the culprit and not the wiring, I would use a separate dash
mounted switch straight from the battery with an in-line fuse.
[fon‌t=Tahoma, Calibri, Verdana, Geneva, sans-serif]The Older I get the Better I Was!  Cool [/font]
Reply
#5
If you do that, make sure you have some sort of indicator. I had a similar arrangement on a LHD Renault 12 and got pulled over by the constabulary for having my reversing lights on.
Malc

Stupid computer!
Security system should not fail safe!
Security system should fail dangerous!
Reply
#6
Renault 12? They were a v good car,with the 18,last of the good Renaults.In my opinion.
Strawberry flavoured windows  Dodgy
Reply
#7
It had the Renault equivalent of the A series engine in it, same as my Renault 10 that was my previous car. It was quite roomy and comfortable although when I blew the head gasket it warped the head and it never ran right afterwards.

Actually that was my father's fault, he told me he'd checked the water, which he had, just neglected to tell me that he hadn't topped it up.
Malc

Stupid computer!
Security system should not fail safe!
Security system should fail dangerous!
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)
Welcome, Guest
You have to register before you can post on our site.


  

Password
  





Search Forums

(Advanced Search)

Latest Threads
Rear hub nut torque setti...
Last Post:ffrenchie
Today 11:12 AM
» Replies: 2
» Views: 27
Poor cold startup 1.9
Last Post:jj9
Today 09:42 AM
» Replies: 35
» Views: 833
peugeot charger
Last Post:Jed Clampit
Yesterday 11:28 PM
» Replies: 5
» Views: 159
hello
Last Post:Jed Clampit
Yesterday 11:16 PM
» Replies: 2
» Views: 52
XTR heater control bulb r...
Last Post:VicG
Yesterday 10:57 PM
» Replies: 0
» Views: 31
Fuel consumption
Last Post:ron
Yesterday 09:41 PM
» Replies: 12
» Views: 298
Rear Wiper Motor
Last Post:minisandfords
Yesterday 08:48 PM
» Replies: 2
» Views: 94
Lower Ball Joint
Last Post:brodfather11
Yesterday 08:38 PM
» Replies: 2
» Views: 94
Bottom Ball joint
Last Post:Andyy
Yesterday 08:26 PM
» Replies: 6
» Views: 112
cutting out HDi 1.6 diese...
Last Post:Col
Yesterday 06:15 PM
» Replies: 18
» Views: 1477

Locations of visitors to this page