Search Results
Post Author Forum Replies Views Thanked [asc]
    Thread: 2.0 HDI EML [P0227] on cold mornings
Post: RE: 2.0 HDI EML [P0227] on cold mornings

(18-01-2024, 11:49 AM)td5 Wrote:  I have tried leaving the ignition on for several minutes before cranking to give the glowpugs time to do their pre/post thing, also tried pumping pedal and/or h...
ffrenchie M59 Berlingo 3 234 22-01-2024, 01:06 PM
    Thread: 2.0 HDI EML [P0227] on cold mornings
Post: RE: 2.0 HDI EML [P0227] on cold mornings

How quickly does it fire up when cranking? Only asking as IIRC the ECU has to see 300rpm cranking speed before firing the injectors / starting the engine. The standard 2.0hdi starter is 1.4kw and stru...
Kyleonsite M59 Berlingo 3 234 18-01-2024, 04:30 PM
    Thread: Poor performance 2.0HDI
Post: RE: Poor performance 2.0HDI

Mine did this a few years ago, you can diagnose it by just disconnecting the MAF sensor and the car will drive better straight away without putting any warning lights up.
ffrenchie M59 Berlingo 4 423 25-03-2023, 05:03 PM
    Thread: Poor performance 2.0HDI
Post: RE: Poor performance 2.0HDI

(03-03-2023, 07:17 PM)Blackshuck Wrote:  My '04 2.0 HDI is also having the same issues as yours , re labouring at 30 mph in 4th - can you remember the eBay seller you got your MAF sensor from ? ...
Van Rouge M59 Berlingo 4 423 25-03-2023, 05:03 PM
    Thread: Poor performance 2.0HDI
Post: RE: Poor performance 2.0HDI

Mine did this a few years ago, you can diagnose it by just disconnecting the MAF sensor and the car will drive better straight away without putting any warning lights up.
ffrenchie M59 Berlingo 4 423 08-03-2023, 11:11 PM
    Thread: Poor performance 2.0HDI
Post: RE: Poor performance 2.0HDI

(03-03-2023, 07:17 PM)Blackshuck Wrote:  My '04 2.0 HDI is also having the same issues as yours , re labouring at 30 mph in 4th - can you remember the eBay seller you got your MAF sensor from ? ...
Van Rouge M59 Berlingo 4 423 07-03-2023, 07:03 AM
    Thread: MK1 2.0HDI gearbox oil change, here's how
Post: MK1 2.0HDI gearbox oil change, here's how

Todays job was changing the gearbox oil on my 2002 2.0HDI van You will need; 17mm spanner 10/13/19/21mm socket 18" hose pipe funnel flat bladed screwdriver phillips screw driver receptacle to catch...
steve valentine Member Submitted Tutorials & How To's 9 26,269 02-10-2019, 09:32 PM
    Thread: new crank sensor, now vibrating badly at speed?
Post: RE: new crank sensor, now vibrating badly at speed...

If anyone stumbles upon this thread looking for answers on a similar fault, here's what the prob was that caused the vibrations... Mud! I have spent days on the www trying to find answers, even fitt...
gavtheoldskater M59 Berlingo 2 2,081 04-08-2017, 06:44 PM
    Thread: new crank sensor, now vibrating badly at speed?
Post: RE: new crank sensor, now vibrating badly at speed...

If anyone stumbles upon this thread looking for answers on a similar fault, here's what the prob was that caused the vibrations... Mud! I have spent days on the www trying to find answers, even fitt...
gavtheoldskater M59 Berlingo 2 2,081 04-08-2017, 09:12 AM
    Thread: MK1 2.0HDI gearbox oil change, here's how
Post: MK1 2.0HDI gearbox oil change, here's how

Todays job was changing the gearbox oil on my 2002 2.0HDI van You will need; 17mm spanner 10/13/19/21mm socket 18" hose pipe funnel flat bladed screwdriver phillips screw driver receptacle to catch...
steve valentine Member Submitted Tutorials & How To's 9 26,269 13-04-2015, 02:06 PM
    Thread: Alternator not charging no 12v at small purple wire
Post: RE: Alternator not charging no 12v at small purple...

Hi, This "excitation voltage" is produced from the Bsi and connects to the alternator through the engine bay fuse box. Check all engine bay fuse connections and also the Bsi connections. "EP" connecto...
Rustscrat M59 Berlingo 4 24,432 30-11-2012, 09:41 PM
    Thread: Alternator not charging no 12v at small purple wire
Post: RE: Alternator not charging no 12v at small purple...

The alternator needs 12v to make it work. This is usually supplied through the ignition switch. Faulty ignition switch ?
brodfather11 M59 Berlingo 4 24,432 30-11-2012, 09:41 PM
    Thread: MK1 2.0HDI gearbox oil change, here's how
Post: MK1 2.0HDI gearbox oil change, here's how

Todays job was changing the gearbox oil on my 2002 2.0HDI van You will need; 17mm spanner 10/13/19/21mm socket 18" hose pipe funnel flat bladed screwdriver phillips screw driver receptacle to catch...
steve valentine Member Submitted Tutorials & How To's 9 26,269 28-10-2012, 05:49 PM
    Thread: MK1 2.0HDI gearbox oil change, here's how
Post: MK1 2.0HDI gearbox oil change, here's how

Todays job was changing the gearbox oil on my 2002 2.0HDI van You will need; 17mm spanner 10/13/19/21mm socket 18" hose pipe funnel flat bladed screwdriver phillips screw driver receptacle to catch...
steve valentine Member Submitted Tutorials & How To's 9 26,269 08-09-2012, 10:07 AM
    Thread: MK1 2.0HDI gearbox oil change, here's how
Post: MK1 2.0HDI gearbox oil change, here's how

Todays job was changing the gearbox oil on my 2002 2.0HDI van You will need; 17mm spanner 10/13/19/21mm socket 18" hose pipe funnel flat bladed screwdriver phillips screw driver receptacle to catch...
steve valentine Member Submitted Tutorials & How To's 9 26,269 24-06-2012, 03:46 PM
    Thread: done a seat rebuild
Post: done a seat rebuild

well i got fed up with the seat killing my butt.ive read lots of people with the same problem and no one having any luck with finding something else to fit . so today i removed my seat and after remov...
landcrab Solved 5 6,341 12-03-2012, 11:31 PM
    Thread: Changing a clutch
Post: RE: Changing a clutch

(01-02-2012, 02:15 PM)Johntom Wrote:  Hi I am intending to change the clutch on my 2004 1.9 diesel (engine dw8, gearbox Be4r) and had a few questions. Do I just need to remove the n/s drive sha...
mr woo Solved 12 15,931 05-02-2012, 08:11 PM
    Thread: Changing a clutch
Post: RE: Changing a clutch

(05-02-2012, 04:13 PM)Johntom Wrote:  Hi Thanks for the reply I will give it a go next weekend. Do the drive shafts just pull out of the gearbox and what do I need to undo at the wheel side to r...
mr woo Solved 12 15,931 05-02-2012, 08:10 PM
    Thread: Changing a clutch
Post: RE: Changing a clutch

(01-02-2012, 02:15 PM)Johntom Wrote:  Hi I am intending to change the clutch on my 2004 1.9 diesel (engine dw8, gearbox Be4r) and had a few questions. Do I just need to remove the n/s drive sha...
mr woo Solved 12 15,931 03-02-2012, 04:48 PM
    Thread: MK1 2.0HDI gearbox oil change, here's how
Post: MK1 2.0HDI gearbox oil change, here's how

Todays job was changing the gearbox oil on my 2002 2.0HDI van You will need; 17mm spanner 10/13/19/21mm socket 18" hose pipe funnel flat bladed screwdriver phillips screw driver receptacle to catch...
steve valentine Member Submitted Tutorials & How To's 9 26,269 27-01-2012, 10:36 PM