Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
What is this connector for
#1
Needed to replace one of the capless bulbs in the fron interior light, and noticed there is an unused connector attached to the same wire - it goes to where a vent-looking hole is at the front of the plastic part.
Anyone got any ideas at what it is for ?

My best guess would be interior alarm sensor (btw can the alarm be easily fitted after market from original bits?)

Thanks
Reply
#2
Got a picture of it?
Reply
#3
I'll try and get a photo tomorrow.
It's a two wire connector held onto the plastic trim inside the light unit.
The "vent-looking hole" looks about the size of a 2p coin and is just before the interior light (if looking at it from the drivers seat)
Reply
#4
(18-04-2015, 11:00 PM)Geoffes Wrote:  I'll try and get a photo tomorrow.
It's a two wire connector held onto the plastic trim inside the light unit.
The "vent-looking hole" looks about the size of a 2p coin and is just before the interior light (if looking at it from the drivers seat)

Just behind the center light cluster
   

There is this connector

   

Thinking about it now - could it be for a microphone for the optional car kit (not installed unfortunately)
Reply
#5
(21-04-2015, 02:14 PM)doofer Wrote:  It does look like an alarm sensor.  Or maybe a temperature sensor for the optional climate control.

I'll have a look at mine later - I have climate control but no alarm.

By the way... stick some LED bulbs in, they're a mllion times better.  The original bulbs are like yellowish candles in comparision.

I got some LEDs from the A store (10 PCS Super White Wedge T10 20-SMD LED Light bulbs) - but they are too long to fit the plastic lens over properly.
Plus when the car dims the lights down when you start the ignition etc - they glow dimly and don't turn off properly.

I also need to do something about the lighting in the rear - talk about poor, that one lowly 501 bulb.
Reply
#6
It is a microphone for (well on mine) a Bluetooth phone
--------------------------------------------------------------

2012 Iron Grey XTR 110 with lots of bits and bobs.
Reply
#7
Can confirm with Trevor it's for the Hands free Microphone. The other end of the cable should be behind the front pillar lower trim Drivers side. Can't confirm that at the moment.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Welcome
You have to register before you can post on our site.

Username:
  

Password:
  




[-]
Search
(Advanced Search)

[-]
Latest Threads
Solenoid location
Last Post: OMG
Today 06:07 PM
» Replies: 2
» Views: 89
Do thing right themselves?
Last Post: tdonbay
Today 05:44 PM
» Replies: 2
» Views: 134
Bolt torque settings
Last Post: LukeC
Today 05:42 PM
» Replies: 0
» Views: 7
Thoughts on Leisure battery powering radio when ...
Last Post: AlRamsay
Today 05:19 PM
» Replies: 0
» Views: 15
2012 1.6hdi Won't start!
Last Post: smutts
Today 03:06 PM
» Replies: 5
» Views: 535
roof rack
Last Post: Vowders
Today 12:33 PM
» Replies: 0
» Views: 28
Oil sump design.
Last Post: evdama
Today 10:59 AM
» Replies: 10
» Views: 718
Amdro Dometic Origo stove can it be changed to g...
Last Post: Wightlingo
Today 07:56 AM
» Replies: 2
» Views: 89
buying advice - bonnet release lever broken
Last Post: geoff
Today 06:51 AM
» Replies: 4
» Views: 124
OBD Faults listed - which how to fix?
Last Post: Anyinfo
12-05-2024 11:38 PM
» Replies: 3
» Views: 160

[-]
Recent Visitors
Locations of visitors to this page

[-]
Hosting by

QuickHostUK