Thread Rating:
  • 9 Vote(s) - 2.78 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Airbag warning fault P1F40 B106f
#1
Hi all,

Hope someone can help as my this has failed my MOT.

I have the fault codes P1F40 (unknown code) and B106F (passenger airbag no moving device fault: local, no characteristic)

I have tried cleaning both the connectors under the seat and also the orange connector going into the pretensioner, I've also had a mess with the wire going into the seat belt it's self.

Anyone ever solved this problem or can point me to what these codes mean?

Thanks alot
Reply
#2
Don't forget the passenger side has a pretensioners as well. The air bag light might mean you have a Comms fault somewhere in your loom but a read with Lexia will be able to pin point it. :thumbsup:
2006 2.0hdi 600 with bench seat.  Cool
Reply
#3
Hi,

Thanks for the reply.

The thing is the passenger side doesn't have a airbag, the guy with the dianostic said it may say passenger meaning the driver???

There is no pretensioner on the passenger side, the seat folds up and nothing under.

I take it a lexia is what citreon have?

Thanks
Reply
#4
The passenger side should still have a pretensioner on the seat belt stalk even though no passenger airbag is fitted (mine does). It sounds odd that there's no wiring under the seat :-S

Lexia is Citroëns diagnostic tool.
Reply
#5
I didn't mention its a berlingo van, it's a fold up seat with storage under

I've been told even though its has no passenger airbag the harness is still there? And this may be faulty
Reply
#6
It's behind the plastic cover on the hand brake side. :thumbsup:
2006 2.0hdi 600 with bench seat.  Cool
Reply
#7
Ok I'll have a look, is it accessible or will it involve removing seats etc?
Reply
#8
There's two sunken screws holding the plastic in, remove them and you're in business. :thumbsup:
2006 2.0hdi 600 with bench seat.  Cool
Reply
#9
I'm pretty sure there isn't one, there isn't a wire going into the seat belt it's self like the drivers side.
Reply
#10
I'm presuming you are talking about the wire going into the seatbelt fastener? This is for the indication that your belt is fastened, nothing to do with the air bag.
The passengers side does not have one of these.:thumbsup:
2006 2.0hdi 600 with bench seat.  Cool
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Welcome
You have to register before you can post on our site.

Username:
  

Password:
  




[-]
Search
(Advanced Search)

[-]
Latest Threads
2012 1.6hdi Won't start!
Last Post: smutts
Today 03:06 PM
» Replies: 5
» Views: 535
roof rack
Last Post: Vowders
Today 12:33 PM
» Replies: 0
» Views: 27
Oil sump design.
Last Post: evdama
Today 10:59 AM
» Replies: 10
» Views: 717
Amdro Dometic Origo stove can it be changed to g...
Last Post: Wightlingo
Today 07:56 AM
» Replies: 2
» Views: 87
buying advice - bonnet release lever broken
Last Post: geoff
Today 06:51 AM
» Replies: 4
» Views: 123
Solenoid location
Last Post: saskak
Yesterday 07:30 PM
» Replies: 1
» Views: 87
OBD Faults listed - which how to fix?
Last Post: Anyinfo
12-05-2024 11:38 PM
» Replies: 3
» Views: 157
Do thing right themselves?
Last Post: Leonberger
12-05-2024 08:54 PM
» Replies: 1
» Views: 123
Rear Suspension Rebuilders?
Last Post: smutts
12-05-2024 03:37 PM
» Replies: 5
» Views: 182
2023 electric
Last Post: Anyinfo
12-05-2024 09:43 AM
» Replies: 5
» Views: 157

[-]
Recent Visitors
Locations of visitors to this page

[-]
Hosting by

QuickHostUK